Monday, September 30, 2019

Water Heater Dallas TX
Water Heater Dallas TX 🔧👋
How to Drain a Water Heater

Part 1 : Water Heater Prep
1 - Turn off your water heater.
2 - Allow the water in the water heater to cool before continuing. 

Part 2 : Water Heater Flow
1 - Turn the cold water intake valve off.
2 - Turn on a hot water tap in your house to remove excess water in the pipes.
3 - Open the pressure relief valve on the tank.

Part 3 : Garden Hose Drainage
1- Find a very long garden hose.
2 - Test the length of the hose before continuing.
3 - Assess whether your water heater sits above or below ground level.
4 - Connect the pump, if this is necessary.
5 - Connect the garden hose to the water heater drain valve.
6 - Allow the water to pump out or drain out completely.
7 - Catch some of the water in a bucket, if the water is going to escape into a drain.

Part 4 : Water Heater Flushing
1 - Assess the water in the bucket for evidence of sediment.
2 - Flush the water heater, if there is a large amount of sediment.
3 - Disconnect the garden hose, flip the pressure switch and turn your gas intake or electricity intake back on.

Water Heater Dallas TX 💪😍
(972) 559-4113